Overhaul set external drive shaft 24mm Fiat 126 / 500 / 600

This axle boot with a 25 mm metal bushing and a shaft seal ring is suitable for the Fiat models 126, 500 and 600. It is used to protect the drive shaft from dirt and moisture and provides a reliable seal. Made from high quality material, this axle boot offers high durability and a long service life. Easy to install, it ensures effective drive shaft protection and smooth power transmission. Keep your drive shaft protected and in optimum condition with this high-quality axle boot.

The oil seal is used for the axle boot on the Fiat 126, Fiat 500 and Fiat 600. It serves to seal the drive shaft and prevents the penetration of dirt and moisture. The Simmerring measures 35x25x7 mm and is made of high-quality material. If the oil seal leaks or is damaged, it should be replaced to protect the drive shaft and ensure optimum performance.

Castrol Classic EP 90 gearbox oil has been specially developed for use in classic vehicles such as Fiat 126, Fiat 500, Fiat 600 and Fiat 850. It provides optimum lubrication for the gearbox and protects against wear. The transmission oil is of high quality and ensures smooth transmission function. With this Castrol Classic gearbox oil you can maintain the performance and the life of the gearbox in your Fiat 126, Fiat 500, Fiat 600 or Fiat 850. Castrol Classic EP 90 Extreme Pressure API GL 4 is a high viscosity mineral gear oil with antioxidants, anti-wear and high pressure additives to protect against oil oxidation, gear and corrosion damage. Suitable for the lubrication of conventional bevel final drives and hypoid axles without major axle offset, where API GL 4 gear oils are recommended.Castrol Classic EP 90 Extreme Pressure API GL 4 is also suitable for older vehicles due to its high viscosity, where some wear may have already occurred.Important! It should not be used in limited slip differentials or in hypoid axles with high axle misalignment where API GL-5 gear oils are recommended. Specifications: API GL-4 Viscosity: SAE 90Base oil: mineralRange: Suitable for manual transmissions and hypoid axle transmissions without major axle misalignment where API GL 4 is recommended. There are many good reasons for Castrol Classic. Experience is priceless, especially in the classic car sector. Castrol has been producing high quality lubricants since 1899. Castrol is a leading premium brand in the areas of development and research. In addition to modern oils, Castrol produces special engine and transmission oils for classic cars of all years. Castrol quality is also regularly proven in racing. Castrol Classic is recommended by many classic car clubs. Many independent tests prove the quality of Castrol Classic.

The steel bolt with a strength class of 10.9 is used for the axle coupling and rear wheel drive on the Fiat 126, Fiat 500 and Fiat 600. It is used to securely fasten the axle coupling and the rear wheel drive to the vehicle. The steel bolt is easy to fit and of high quality. If the steel bolt is damaged or missing, it should be replaced to ensure the stability and safety of the axle coupling and drive system.

Castrol Classic XL 20W50 5L engine oil is specially developed for classic vehicles such as the Fiat 126, Fiat 500 and Fiat 600. It provides optimal lubrication and protects the engine from wear and corrosion. The engine oil has a viscosity of 20W50 and is suitable for use in various weather conditions. It meets the requirements and specifications for classic vehicles. A high quality engine oil for the care of your Fiat vehicle. Castrol Classic XL 20W-50 is a conventional multigrade engine oil of good all-round performance, formulated with high quality mineral oils and selected additives, ideal for older technology and vintage engines. Suitable for vehicles with petrol engines before 1980 that require a high quality product but a special additive formulation. Fiat 126 I. oil quantity: 2.65l litres when new / 2.5l when changing oil  Fiat 500 oil quantity: 2.65 litres when new / 2.5l when changing oil Fiat 600 oil quantity: 3.6 litres when new / 3.25l when changing oil

The clamp with a diameter of 41-44 mm is used for the Fiat 500 (not R). It is used to attach hoses, pipes or cables and ensures a secure hold. The clamp is easy to fit and of high quality. If the clamp is damaged or missing, it should be replaced to ensure a secure fastening.

The axle flange/slider is an important part of the drive shaft of the Fiat 500, Fiat 126 and Fiat 600. It enables a smooth transmission of the drive power to the wheels. The sliding piece has a diameter of 24 mm and is made of high-quality material to ensure a long service life. If worn or damaged, the axle flange/slider should be replaced to prevent further damage to the drive shaft.

The brake pedal return spring for the Fiat 126 and Fiat 500 R is an important spare part for the brake system. The return spring ensures proper return of the brake pedal after braking. It is made of high-quality material and offers optimum return force. The brake pedal return spring is easy to fit and offers an optimum fit. As an original spare part, it ensures reliable functioning and contributes to the safe braking function of the vehicles.

The tappet tube gasket is located between the tappet tube and the cylinder head of the Fiat 500. It ensures a reliable seal and prevents oil from leaking. The gasket is made of high quality material and is easy to install. If the tappet tube gasket is damaged or leaking, it should be replaced to prevent oil leakage and possible engine damage.

The steering knuckle reamer is a tool specially designed for Fiat 126, Fiat 500 and Fiat 600 models. It is used to machine the steering knuckle and ensure a precise fit. The reamer is made of high quality material and is durable. With this reamer, you can carry out maintenance work on your vehicle professionally.

The axle boots with a thick version for the wheel side are used for the Fiat 500, Fiat 126 and Fiat 600. They are used to seal the drive shaft and prevent the ingress of dirt and moisture. The axle boots are easy to install and of high quality. If the axle boots are damaged or leaking, they should be replaced to ensure optimum operation of the drive system.

The reverse light switch for the gearbox is suitable for both the Fiat 126 and the Fiat 500. It enables the reversing lights to be switched on and off when shifting into reverse gear. The switch is made of high-quality material and is easy to install. It ensures reliable operation of the reversing lights.

The axle boot is used for the Fiat 600. It is used to protect the drive shaft from dirt, moisture and other impurities. The axle boot is easy to fit and of high quality. If the boot is damaged or leaking, it should be replaced to ensure optimal function of the drive shaft.