Product information "Headlight frame rubber/metal bracket (pair) Fiat 126"
Set of headlight frames consisting of rubber and metal tab, specifically for the Fiat 126. Provides protection and stability for the headlights. Easy fitting and perfect fit for the vehicle.
The Bilux bulb with 12V and an output of 40/45 watts is suitable for the Fiat 126, Fiat 500 and Fiat 600. It serves as a headlight bulb and provides a clear view at night. The bulb is easy to install and of high quality. If the bulb is defective or burnt out, it should be replaced to ensure driving safety.
The bracket for the headlight is used for the Fiat 126. It is used to securely fasten the headlamp. The bracket is easy to fit and of high quality. If the bracket is damaged or missing, it should be replaced to ensure that the headlight is securely attached.
The bracket for the headlamp is suitable for the Fiat 126 and is used to securely fasten the headlamp. The clamp is made of high-quality material and ensures a reliable mounting. With this bracket, you can securely attach the headlight to the vehicle and ensure optimum light output.
The test lamp with a voltage of 12 V is specially developed for the light and ignition adjustment in the Fiat models 126, 500 and 600. It is used to check and adjust the electrical systems in the vehicle. This test lamp is made of high quality material and offers precise performance. With this test lamp, you can perform a reliable check of the light and ignition systems in your Fiat vehicles and ensure optimal function.
High-quality headlamp cover especially for the Fiat 126. Ensures secure attachment and optimum alignment of the headlamp. An important spare part for the vehicle lighting.
The frame for the left and right headlamp is an important spare part for the Fiat 126. It is used to hold the headlamp securely and firmly and to ensure optimum alignment. The frame is specially designed for the Fiat 126 and fits perfectly in the designated area. It is made of high quality material and offers a durable and robust construction. With this frame, you can be sure that your headlights are optimally fixed and provide reliable illumination.
The H4 bulb with Bilux socket and a wattage of 45/40W is used for the Fiat 126, Fiat 500 and Fiat 600. It serves as a headlight bulb and provides clear visibility at night. The bulb is easy to install and of high quality. If the bulb is burnt out or defective, it should be replaced to ensure optimum lighting and safety while driving.
The H4 bulb with Bilux socket 60/55W is a high quality lighting solution for Fiat 126, Fiat 500 and Fiat 600. This bulb provides clear and bright illumination of the road and improves visibility at night. With its Bilux socket, it can be used as both a low beam and a high beam. The bulb has an output of 60/55W and offers a long service life. It is easy to install and fits perfectly in the headlight of your vehicle. With this H4 bulb you can drive safely and comfortably, whether in the dark or in bad weather conditions. It is an indispensable spare part for your vehicle lighting.
For the use of this stronger bulb, we also recommend our article 10875, which protects the steering column switch from overvoltage.If this stronger bulb is installed, a higher current flows through the steering column switch and this could be damaged at some point.When using article 10875, only the lower control current flows via the steering column switch and the high operating current flows via the new relay.This protects the steering column switch and improves the light (even if the normal 45/40 Watt bulbs are installed).
The H4 12 Volt - 60/55 Watt halogen bulb is a high quality lighting element for the Fiat 126 and Fiat 600, providing clear and bright illumination that improves visibility and safety while driving. This halogen bulb is rated at 60/55 watts and provides reliable illumination of the road. It is easy to install and offers a long service life. With this halogen bulb, you can ensure that your vehicle is optimally illuminated and complies with legal requirements. It is an essential spare part for your vehicle's lighting maintenance and repair.
For the use of this stronger bulb, we also recommend our article 10875, which protects the steering column switch from overvoltage.If this stronger bulb is installed, a higher current flows through the steering column switch and this could be damaged at some point.When using article 10875, only the lower control current flows via the steering column switch and the high operating current flows via the new relay.This protects the steering column switch and improves the light (even if the normal 45/40 Watt bulbs are installed).
The headlight adjustment screw is suitable for the Fiat 126. It allows you to precisely adjust the headlight to ensure optimum illumination of the road. The adjustment screw is easy to use and provides reliable operation. With this adjustment screw, you can improve visibility and safety while driving.
The H4 headlight connector is specially designed for the Fiat 500. It is used to connect the H4 headlight to the vehicle's electrical system. This headlight connector is made of high-quality material and offers a precise fit. With this headlight connector, you can make a reliable electrical connection and ensure optimal lighting function of your Fiat 500.
The parking light socket is suitable for various Fiat models. It is used to hold the parking light bulb securely and ensure reliable lighting. The parking light socket is made of high-quality material and offers easy installation. With this parking light socket, you can improve visibility and safety during parking light operation in your Fiat vehicle.
Car cover Outdoor Special structure and manufacture from three-layer, waterproof, vapour-permeable membrane and hardly water-permeable, vapour-permeable material. This makes the cover almost completely watertight and, at the same time, allows the accumulated moisture under the cover to escape to the outside when the ambient temperature is positive.
The outdoor car cover with a length of 300-310 cm is used for the Fiat 126 and Fiat 500. It is used to protect the vehicle from weather conditions such as sun, rain and snow. The car cover is easy to fit and of high quality. If the car cover is damaged or worn, it should be replaced to ensure optimal protection of the vehicle.
The accelerator pedal rubber is suitable for Fiat 126, Fiat 500 and Fiat 600 models. It is used to make the accelerator pedal area non-slip and to enable comfortable operation. The accelerator pedal rubber is made of high-quality material and offers reliable adhesion. With this accelerator pedal rubber, you can improve driving comfort and vehicle control in your Fiat 126, Fiat 500 or Fiat 600.
The rubber boot for the Fiat 126 fuel filler cap is an important spare part for the fuel system. This boot ensures a reliable seal of the fuel filler cap and prevents fuel vapours from escaping. It is made of high-quality rubber and specially developed for the Fiat 126. With this rubber boot, you can replace a damaged or worn boot and ensure the correct functioning of your fuel system. Installation is simple and requires no special tools.
The fuel filler hose has been specially developed for the Fiat 126. It serves as a replacement for the original fuel filler hose and ensures safe and reliable fuel filling. The hose is made of high-quality material and is durable. With this fuel filler hose, you can ensure the function and safety of your fuel system.
The H4 reflector insert for left-hand drive is specially developed for the Fiat 126. It ensures optimum light output and provides improved visibility while driving. The reflector insert is easy to install and fits perfectly into the Fiat 126 headlight. An indispensable insert for safe and comfortable vehicle lighting.
The H4 headlight connector is specially designed for the Fiat 500. It is used to connect the H4 headlight to the vehicle's electrical system. This headlight connector is made of high-quality material and offers a precise fit. With this headlight connector, you can make a reliable electrical connection and ensure optimal lighting function of your Fiat 500.
The gearshift housing is an important spare part for the Fiat 126 and Fiat 500. It houses the gearstick lever and mechanisms and allows the gears to be changed. The gearshift housing is specially designed for these vehicle models and fits perfectly in the designated area. It is made of high-quality material and offers reliable function. With this gearshift housing, you can be sure that your Fiat 126 or Fiat 500 can be shifted perfectly and optimal vehicle control is guaranteed. Count on quality and functionality with the gearshift housing for your Fiat 126 or Fiat 500.
The sun baffle for the Fiat 126 is a practical accessory that provides more comfort inside the vehicle, especially in sunny regions. The sun baffle is fitted to the windscreen of the vehicle and protects against direct sunlight, reducing the heating of the vehicle interior. It is available in a range of colours including green, blue or red to suit personal taste and vehicle style. The sun shade for the Fiat 126 is TÜV approved and meets the required quality and safety standards. It is made of hard-wearing material that is UV-resistant and ensures a long service life. Fitting the sun barge is simple and does not require any special tools. The sun baffle can be used to keep the interior of the Fiat 126 pleasantly cool, especially on hot and sunny days. At the same time, it protects the dashboard and other sensitive surfaces from sun damage.
The front axle with independent suspension and struts has been specially developed for the Fiat 126 and Fiat 500 models. It ensures optimum driving stability and precise steering of the vehicle. The front axle is made of high-quality material and has a perfect fit.
The vehicle lighting switch is designed for Fiat 500 and Fiat 600 models. This black switch with flat plug connector allows you to easily switch the vehicle lights on and off. It is easy to install and provides reliable operation. With this switch, you can conveniently control your vehicle's lighting.
High-quality headlamp cover especially for the Fiat 126. Ensures secure attachment and optimum alignment of the headlamp. An important spare part for the vehicle lighting.
The headlight ring in chrome is suitable for the Fiat 600 from July 1961. It gives the headlights a classic and elegant look. The headlight ring is made of high-quality chrome and fits perfectly around the headlights with a diameter of 13/18 cm. With this headlight ring, you can enhance the appearance of your Fiat 600 and give it a stylish look. Go for quality and aesthetics with the headlight ring in chrome for your Fiat 600.
Product number:
C2314
€81.90*
Expert for Fiat for 40 years
Over 4000 different spare parts
Worldwide shipping
info@fiatclassic.com
This website uses cookies to ensure the best experience possible. More information...